At FlowGuard Gold® CPVC we strive to provide complete and accurate information to plumbers and homeowners regarding use of CPVC in residential plumbing. To that end, we’ve compiled the answers to frequently asked questions in this post.
CPVC was first introduced in the U.S. in 1959 and some of the earliest installations are still in service today so CPVC has proven exceptionally reliable in residential plumbing. FlowGuard Gold pipe and fittings are designed for a 50-year service life with a safety factor of 2.
CPVC stands for chlorinated polyvinyl chloride; this is important because the fact that CPVC is chlorinated gives it an advantage in dealing with common water treatment chemicals compared to other materials. The chlorine molecules in the pipe effectively block the chlorine and chloramine in the water supply from attacking the pipe, making the material immune to chlorine degradation and extending the lifespan. CPVC is also virtually impermeable and is not subject to unsafe leaching.
Neither PEX nor copper, the other materials commonly used for residential plumbing today, have a similar chlorine barrier and both are subject to chlorine degradation that can shorten expected lifespans. PEX is also susceptible to permeation and leaching, which can introduce unwanted chemicals into the water supply.
FlowGuard Gold CPVC complies with ASTM standards and is designed for reliable operation at higher pressures than other plumbing systems. It can operate constantly at 100 psi at 180° F or 400 psi at 73° F.
While all CPVC pipes and fittings share a common chemical composition, there are important differences between generic CPVC and FlowGuard Gold CPVC. All FlowGuard Gold pipes and fittings sold in the United States are made from resins and compounds produced at Lubrizol’s Louisville, Kentucky facility to ensure consistent quality. FlowGuard Gold pipe and fittings have the only complete plumbing system that is pressure rated by the Plastic Pipe Institute and consistently outperforms generic CPVC. For example, FlowGuard Gold CPVC provides as much as 92% higher sustained pressure resistance at elevated temperatures compared to generic CPVC.
While FlowGuard Gold CPVC is designed for a 50-year service life with a safety factor of 2, the systems can fail earlier if they are not properly installed or handled. Spontaneous failures are extremely rare and when they do happen, they can typically be traced back to exposure to a critical installation error.
FlowGuard Gold CPVC installation procedures are straightforward and easy-to-follow. Failing to follow recommended procedures can compromise the integrity of any plumbing system. While failures are rare, when we do receive and analyze a failure, there are a few installation errors that show up most frequently:
Always be sure you are familiar with manufacturer recommended installation processes before installing any piping material.
When properly installed and handled, CPVC will not spontaneously fail due to brittleness. As CPVC ages, it becomes more rigid giving it increased pressure-bearing capability, but this increased rigidity comes with reduced ductility, sometimes referred to as “brittleness”. If the system was improperly installed under excessive stress, over time failures may occur.
However, the most common problem we see in the field related to “brittleness” is the result of improper tool use on the part of service contractors.
When cutting into aged CPVC pipe on a service call, it is critical that a non-compressive tool be used, this includes a c-style tubing cutter, wheel cutter or a fine-tooth saw. If ratchet cutters or shears are used in service, the pipe may be damaged.
New CPVC pipe can be cut using a standard ratchet cutter, C-style tubing cutter or wheel cutter. Non-ratcheting pipe shears or PEX cutters should never be used. A chamfering tool is recommended to bevel the edge of the pipe before inserting the pipe into the fitting. We also offer a one-step solvent cement for creating strong welds between pipes and fittings.
CPVC can be installed under slab, underground or encased in concrete. This does not affect the performance of the CPVC. When installed in the ground, care should be taken to ensure the ground is not contaminated with incompatible chemicals.
FlowGuard Gold CPVC can be joined using FlowGuard Gold one-step solvent cement. For service applications where a faster cure time is needed, we recommend Oatey® Orange Lava CPVC Cut-In solvent cement. It enables rapid, one-step cure times as fast as 15 minutes for cold water lines.
Two-step solvent welding (primer + regular orange CPVC solvent cement) is permitted on FlowGuard Gold CPVC, however cure times may be longer than when using one-step cement.
Push-connect fittings that have been tested to ASSE 1061 and are listed for use with CPVC can be used on FlowGuard Gold CPVC for emergency repairs where immediate return to operation is needed, however a solvent welded connection is still the preferred method of joining pipe and fittings.
PVC pipe is not the same as CPVC pipe. PVC is incapable of handling the temperatures and pressures that can be experienced in a domestic water distribution system and is not permitted by code to be used for water distribution inside a home. CPVC is code-approved for residential plumbing and can be used for the complete residential plumbing system.
Our web site, FlowGuardGold.com has a wealth of materials related to CPVC installation and performance. Here are a few suggestions to get you started:
Do you have a question we didn’t answer? Contact us for more information.