Choose Your Location:  

Support   

Contact Us

FlowGuard Gold® CPVC

Discover why FlowGuard Gold Pipe and Fittings is the most well-established non-metallic piping product in the market.

Jonathan Simon

Blog Feature

CPVC  |  Multi-Family  |  pvc

Best Practices for Plumbing Multi-Family Projects

While there are many differences between single-family and multi-family construction, when it comes to plumbing, they have more in common than not. But the size of these buildings can amplify the cost and consequences of poor material choices and design decisions. The cost of poor decision—whether in the design or during installation—isn’t limited to just one home. It can be multiplied across every unit in the complex.

Read More

Blog Feature

Multi-Family  |  PEX  |  Sustainability  |  multiport

Enhancing the Performance of Mini-Manifold Plumbing Systems

Mini-manifold plumbing systems have become a popular approach to reducing water and energy waste in multi-family and hotel construction. These mini-manifold systems, also known as remote manifold and submanifold systems, enable shorter branch lines from the hot water main or recirculating line and can result in faster hot-water delivery as well as contribute to points in both the NGBS and LEED environmental performance rating systems.

Read More
CPVC vs. PEX: Making the Switch

CPVC vs. PEX: Making the Switch

Discover why you should make the switch to FlowGuard Gold® CPVC

Blog Feature

CPVC  |  Installation

Top 5 DIY Mistakes for Service Plumbers to Watch for with CPVC

Since 1959, more than 12 billion feet of FlowGuard Gold® CPVC pipe has been installed in the U.S. This product has proven to be extremely reliable, with many systems still in service after 40 or more years.

Read More

Blog Feature

CPVC  |  CPVC Solvent Cement

COMMON MISTAKES WHEN USING SOLVENT CEMENT FOR CPVC SYSTEMS

As a plumbing service specialist, you’ve seen a lot of pipes fail for a lot of different reasons. With FlowGuard Gold® CPVC – which has a long history of proven reliability -- it’s likely the failure occurred because of an installation error. One of the most common mistakes that we’ve encountered is the improper application of solvent cement. Solvent cement is a vital component in the installation, as it acts as weld between the joint and the pipe. When improperly applied, it can leave the pipes vulnerable to weakness (if too much solvent is applied) or leakage (if not enough is applied).

Read More

Blog Feature

CPVC  |  pvc

Frequently Asked Questions About CPVC Fittings

The right fittings, properly installed, are critical to a properly functioning plumbing system. Here are answers to the most common questions about CPVC fittings.

Read More

Blog Feature

CPVC  |  SYSTEM DESIGN  |  residential plumbing

5 Ways to Design in More Hot Water Efficiency

It's common knowledge homes have become much more energy-efficient over the past several decades. What’s not so widely understood is most of the energy savings are limited to increased efficiency in regulating the temperature of the homes’ living spaces, thanks to vastly improved heating, cooling, and insulation systems. For instance, while roughly 60% of a home’s energy use went to heating and cooling forty years ago, today the average is around 48%. In contrast, over that same time period, the percentage of a home’s energy required to heat and handle water has remained relatively unchanged at around 18%, partly because homes are bigger and often feature more bathrooms, creating additional opportunities for energy loss in distribution.

Read More

Blog Feature

CPVC  |  FlowGuard Gold® CPVC  |  Residential

Common Mistakes When Cost Estimating Plumbing Systems

A plumbing contractor’s profitability is most impacted by 3 factors: How much is charged for services The cost of materials used on a job Labor and overhead expenses

Read More

Blog Feature

Debunking the Myth of Freeze-Proof Pipes

Freezing temperatures can wreak havoc on plumbing systems – especially in parts of the country that rarely receive extreme cold weather. In early 2021, we’ve seen major issues with frozen pipes throughout the state of Texas as a prolonged “polar vortex” brought more than a week of sub-freezing temperatures throughout the state.

Read More

Blog Feature

CPVC  |  PEX  |  engineers

Eliminating the Risks of Piping Degradation from ORP in Residential Water Systems

After the widespread failures of polybutylene in the 1980s, ASTM F2023 was developed to evaluate the oxidative resistance of PEX piping in hot chlorinated water. Today, all PEX and many other polyolefin piping systems, including PPR, PP-RCT and PE-RT, are evaluated to ASTM F2023. But this standard is not without its limits.

Read More

Blog Feature

CPVC  |  FlowGuard Gold® CPVC  |  Homebuilders  |  Residential

3 Plumbing Challenges in a Booming Housing Market

All signs indicate that the housing market will continue to surge in 2021. Unfortunately, with this rapid growth comes challenges, some of which we’ve experienced before. With careful planning, however, you can avoid many costly problems and take full advantage of an environment that should be ripe for building your business. To help ensure your success, consider the unique features of FlowGuard Gold® plumbing systems for maintaining your momentum and sidestepping three issues lurking on the horizon.

Read More